Log In Log In  |  Checkout   |  33 item(s)
1 x DB40, DI Resin Refill Bag for DI210, RD322
1 x PSW-240 Aquatec Pressure Switch 40 psi shut off 1/4" tubing TSO
1 x AME-0402 Male Elbow NPT Thread w/ Quick Connect 1/4 OD 1/8 NPTF
1 x 6044-combo Compression Type Fitting Elbow and Tee fitting
1 x AUC-0706 Union Connector 1/2" to 3/8" OD Quick Connect
1 x CP-OR35+701 O-RING FOR WATERGENERAL BOTTOM FILTER HOUSING CASING
1 x SV-24AC-38, KSD Solenoid Valve 3/8" brass, 24V AC
1 x AUC-0404 Union Connector 1/4" quarter inch, Quick Connect
1 x 723, Feed Water Adapter with Ball Valve
1 x 4044-K Male Elbow Fitting Compression type 1/4" OD 1/4" NPT
1 x PSW-380 Aquatec Pressure Switch 80 psi shut off 3/8" tubing TSO
1 x PSW-360 Aquatec Pressure Switch 60 psi shut off 3/8" tubing TSO
1 x 721, Self-Piercing Valve, Feed Water Adapter for Copper Pipe
1 x FPK, 6 pcs Fitting Pack Union Connector 1/4" quarter inch
1 x Y3414PL, Garden Hose Y Adapter Plastic Valve 1/4" quick
2 x ATU-0404 TEE Union Connector 1/4" quarter inch Quick Connect
2 x 720, Feed Water Adapter with Needle Valve
1 x PSW-260 Aquatec Pressure Switch 60 psi shut off 1/4" tubing TSO
1 x CPR-150G, Pressure Regulator with Pressure Gauge (0-125 psi)
2 x ATU-0606 TEE Union Connector 3/8" Quick Connect
1 x 745, Garden Hose / Laundry Hose Adapter for RO/DI systems
1 x AHUC-0404 Inline Ball Hand Valve Union Connector 1/4" OD Tubing
1 x AUC-0604 Union Connector 3/8 to 1/4" OD, Quick Connect
1 x MK300, Maintenance kit for RO535, RO435, RO545
1 x FV-15, Float Valve, top-mount
1 x 226, Replacement Shower Filter
1 x 727, Feed Water Adapter 3/8" compression adapter 1/4" inline bal
1 x CBV-0404, Tank Ball Valve to 1/4 tubing
1 x FV-14, Float Valve, side-mount
1 x SV-24AC-14, Solenoid Valve 1/4" plastic, 24V AC

View Cart$414.44
Specials Log InCreate Account Checkout  Shopping Cart33 item(s)
1 x DB40, DI Resin Refill Bag for DI210, RD322
1 x PSW-240 Aquatec Pressure Switch 40 psi shut off 1/4" tubing TSO
1 x AME-0402 Male Elbow NPT Thread w/ Quick Connect 1/4 OD 1/8 NPTF
1 x 6044-combo Compression Type Fitting Elbow and Tee fitting
1 x AUC-0706 Union Connector 1/2" to 3/8" OD Quick Connect
1 x CP-OR35+701 O-RING FOR WATERGENERAL BOTTOM FILTER HOUSING CASING
1 x SV-24AC-38, KSD Solenoid Valve 3/8" brass, 24V AC
1 x AUC-0404 Union Connector 1/4" quarter inch, Quick Connect
1 x 723, Feed Water Adapter with Ball Valve
1 x 4044-K Male Elbow Fitting Compression type 1/4" OD 1/4" NPT
1 x PSW-380 Aquatec Pressure Switch 80 psi shut off 3/8" tubing TSO
1 x PSW-360 Aquatec Pressure Switch 60 psi shut off 3/8" tubing TSO
1 x 721, Self-Piercing Valve, Feed Water Adapter for Copper Pipe
1 x FPK, 6 pcs Fitting Pack Union Connector 1/4" quarter inch
1 x Y3414PL, Garden Hose Y Adapter Plastic Valve 1/4" quick
2 x ATU-0404 TEE Union Connector 1/4" quarter inch Quick Connect
2 x 720, Feed Water Adapter with Needle Valve
1 x PSW-260 Aquatec Pressure Switch 60 psi shut off 1/4" tubing TSO
1 x CPR-150G, Pressure Regulator with Pressure Gauge (0-125 psi)
2 x ATU-0606 TEE Union Connector 3/8" Quick Connect
1 x 745, Garden Hose / Laundry Hose Adapter for RO/DI systems
1 x AHUC-0404 Inline Ball Hand Valve Union Connector 1/4" OD Tubing
1 x AUC-0604 Union Connector 3/8 to 1/4" OD, Quick Connect
1 x MK300, Maintenance kit for RO535, RO435, RO545
1 x FV-15, Float Valve, top-mount
1 x 226, Replacement Shower Filter
1 x 727, Feed Water Adapter 3/8" compression adapter 1/4" inline bal
1 x CBV-0404, Tank Ball Valve to 1/4 tubing
1 x FV-14, Float Valve, side-mount
1 x SV-24AC-14, Solenoid Valve 1/4" plastic, 24V AC

View Cart$414.44
Information

Leaking Faucet / Dripping faucet:

If the faucet is dripping slowly, then you need to adjust the black lever. The faucet is partially open so you would see slow drip.

To adjust the lever:
1. Pull the spout off the faucet. (pulling up)
2. Look at the black lever, there is a pin that holds the black lever in place, and observe that the position of the pin
3. Slide the black lever toward the opening to remove the black lever.
4. Look at the position of the pin, and turn the pin counter-clockwise to loosen it, (about 1 to 2 turns)
5. Slide the lever back, to do that you might need to hold the pin in place using a small object like a screw driver while sliding the lever back
6, Then put the spout back
7. You might notice that the lever should be slightly loose
Continue
Home  |   Specials  |   Log In  |   Create Account  |   Checkout  |   Shopping Cart