$110.00
Aquatec Pressure Boost pump CDP 8852 series (High flow) 3/8" and 1/4" fittings
- Including: pump + tranformer 120V/60Hz + both 3/8" and 1/4" fittings
- Aquatec model # 8852-2J03-B424
- Filter part # HF-8852-110V (pump + transformer+ fittings)
- Made in USA
This water booster pump is to boost the input water pressure. It is usually used to increase the input water pressure for Reverse Osmosis systems. (boost pressure to 60 to 80 psi)
This pump is suitable for RO systems that is 100GPD to 200GPD
* This listing is for the pump+ transformer 120V/60hz USA plug + 3/8" and 1/4" fittings. We have another listing that has 220V/50Hz European plug pump +transformer. for $10 additional, or the USA transformer, solenoid valve and pressure switch for $20 additional. Please contact us for other listings.
Benefits of using Booster pump for Reverse osmosis systems
· For RO systems, an increase in input pressure means an increase in water production and water purity
· RO systems will run more efficient, and have less drain water. Since it uses pressure switch and solenoid valve to turn on/off the water input, it can turn-on and turn-off more accurately than the mechanical auto-shut-off valve.
· For large water container or open water tank, you can use float switch or level switch to control the operation of the pump as well.
· The
transformer included in the package is plugged into regular
120V/60HZ electrical outlet in USA.
Specifications:
|
Booster Pump: |
|
Boost pressure |
If input water pressure is about 30 to 50 psi, the pump will boost pressure
to about 60to 80 psi for RO systems |
|
Water open flow |
2.6 liter per minute or 0.69 gallons per minute |
|
Electrical: |
24VAC, 0.70Amp to 1.65amp |
|
Connection |
Inlet and outlet, 3/8" quick connect fitting, also includes two reducer 3/8
to 1/4" fittings |
|
Motor |
Permanent Magnet, 24VAC, enclosed |
|
PUMP |
Diaphragm pump, 3 chamber, self-priming 7 feet prime. It is able to run dry |
|
Material: Housing
|
Nylon |
|
Valves |
EPDM |
|
Diaphragm |
Santoprene |
|
Fasteners |
Stainless Steel |
|
Dimension |
diameter = 3.5" , length = 7.5" |
|
weight |
7.5 lbs. |
|
Transformer |
input 120VAC 60hz output: 24VAC 2.5Amp, Class 2, UL listed |
Log In