$120.00
Aquatec Pressure Boost pump CDP 8800 series (High flow) 3/8" and 1/4" fittings
- Including: pump + tranformer 220V-230V/50Hz + both 3/8" and 1/4" fittings
- Aquatec model # 8852-2J03-B424
- Filter Direct part # HF-88-220V (pump + transformer+ fittings)
- Made in USA
This water booster pump is to boost the input water pressure. It is usually used to increase the input water pressure for Reverse Osmosis systems. (boost pressure to 60 to 80 psi)
This pump is suitable for RO systems that is 100GPD to 200GPD
* This listing is for the pump+ transformer 220V-230V/50hz EURO plug + 3/8" and 1/4" fittings. We have other items that has 110V/60Hz USA plug pump +transformer. or just the transformer, solenoid valve and pressure switch
Benefits of using Booster pump for Reverse osmosis systems
· For RO systems, an increase in input pressure means an increase in water production and water purity
· RO systems will run more efficient, and have less drain water. Since it uses pressure switch and solenoid valve to turn on/off the water input, it can turn-on and turn-off more accurately than the mechanical auto-shut-off valve.
· For large water container or open water tank, you can use float switch or level switch to control the operation of the pump as well.
· The
transformer included in the package is plugged into European
220V-230V/50HZ electrical outlet
Specifications:
|
Booster Pump: |
|
Boost pressure |
If input water pressure is about 30 to 50 psi, the pump will boost pressure
to about 60to 80 psi for RO systems |
|
Water open flow |
2.6 liter per minute or 0.69 gallons per minute |
|
Electrical: |
24VAC, 0.70Amp to 1.65amp |
|
Connection |
Inlet and outlet, 3/8" quick connect fitting, also includes two reducer 3/8
to 1/4" fittings |
|
Motor |
Permanent Magnet, 24VAC, enclosed |
|
PUMP |
Diaphragm pump, 3 chamber, self-priming 7 feet prime. It is able to run dry |
|
Material: Housing
|
Nylon |
|
Valves |
EPDM |
|
Diaphragm |
Santoprene |
|
Fasteners |
Stainless Steel |
|
Dimension |
diameter = 3.5" , length = 7.5" |
|
weight |
7.5 lbs. |
|
Transformer |
input 220-230VAC 50hz output: 24VAC 2Amp, Class 2, UL listed |
Log In