$112.00

Aquatec 8855 Booster Pump + Transformer MADE IN U.S.A.

Aquatec pump #  8855-2LM2-B534   (custom made pump for aeroponics and misting and 300GPD RO systems)

Our internal part # AQ8855-TRM-115V 

For Aeroponics high pressure applications

For Misting applications

For 200GPD to 380GPD RO systems

The Pump includes:

• Pump                     Aquatec 8855 pump to boost input water pressure up to 130 psi  (actual boost pressure depends on your RO system production rate and drain rate)  For aeroponics or misting applications the boost pressure depends on total output flow rate of nozzles.
• Inlet/Outlet:           3/8" quick connect, for 3/8" O.D. tubing
• Transformer:           heavy duty transformer, 115VAC to 24VAC, 3 Amp, plug in to regular 110V electrical outlet, USA plug.
• Instruction sheet
• Two of 3/8 to 1/4 reducer fitting (in case you want to connect 1/4" OD tubing)

NOTE:  This pump assembly is a intermittent duty, not a continuous duty.  If you need to run the pump more than 4 hours non-stop, you can use a timer to turn on one hour and turn off for 1/2 hour to cool down the pump and transformer, or you can put a fan to blow air into the pump assembly to cool it down.

SPECIAL NOTE FOR AEROPONICS APPLICATIONS:

1. You can use a timer to control the pump, when to turn on/off  and the time interval it stays on.
2. Since this pump is very powerful and high flow, for small aeroponic system, you don't need a output pressure tank or pressure switch.
3. For larger aeroponic system, you can add a pressure tank, a pressure switch to the output side,  we do carry special tanks and high pressure switch as well.

Aquatec Boost Pump

CDP 8800 series pump flow rate comparison chart:

Model 8851 -  at open flow, flow rate is 2.10 Liter per minute, at 80 psi, 1.2 L/min. , boost up to 80 psi

Model 8852 - at open flow, flow rate is 2.60 Liter per minute,  at 80 psi, 1.4 L/min., boost up to 80 psi

Model 8855 - at open flow, flow rate is 3.8 Liter per minute,  at 80 psi, 2.0 L/min. ,  boost up to 130 psi

 

Specifications:

Booster Pump:
Boost pressure	boost pressure depends on output flow rate, the pump is capable for boosting up to 130 psi, It is also to boost water pressure from 0 psi to 100 psi for aeroponics applications
Water open flow	3.8 liter per minute or 1 gallon per minute
Electrical:	24VAC
Connection	Inlet and outlet,  3/8" quick connect, connects to 3/8" OD tubing
Motor	Permanent Magnet,  24VAC, enclosed
PUMP	Diaphragm pump, 3 chamber, self-priming.  It is able to run dry
Material:  Housing	Nylon
Valves	EPDM
Diaphragm	Santoprene
Fasteners	Stainless Steel
Dimension & weight	diameter = 3.5" , length = 7.5", weight is about 5 lbs

 

Transformer
Input	115V/60Hz
Output	24VAC  2A
Leads	18 AWG, 4 feet