Digital Flow Monitor (Counting Down, Alert) Made by Digiflow USA
Counting down: set a volume in gallons then it starts counting down when water passing through it. It will beep at the end of countdown. Counting down from: min 100 gal; max 19900 gal.
Elapse time: counting down, counting down from: min. setting 30 days, max setting 720 days.
Real time Flow rate: 0.4 to 6.6 GPM (gallons per minute)
** Minimum flow rate 0.4 GPM
Model: 8100T-G-44 (gallon model)
- Flow totalizing up to 2600 gallons or 9999 Liters
- Flow rate measuring range: 0.4 to 6.6 GPM (gallons per minute)
- Connection: 1/2” BSP + 1/2 BSP to 1/2 quick connect for 1/2 OD tubing
- Optional: if you need 1/2 MPT convertor, it will be $7 extra for a set of two. Please send request and we will bill you.
- Electrical: 3 DC Volt (two AA battery) 1.0mA (display mode) 0.015mA (idle)
- Low battery power alert
- Automatic data saving when battery is out
- Reset button: press and hold the button for 5 sec. to reset to zero
- Sensor body: Acetal copolymer, TICONA M90
- Turbine: Acetal Copolymer
- Turbine shaft: #304 stainless steel
- O-ring: EPDM Rubber
- Housing: ABS resin
- Dimension: (display) 2 3/4" x 2 1/4" x 1 3/8”
- Operating temperature: 40F to 172F or 4 C to 80 C
- Max operating pressure: 85 psi or 6 bar
- Accuracy: +/- 10%