$42.00
Digital Flow Monitor (Counting Down, Alert) Made by Digiflow USA
-
Counting down: set a volume in gallons then it starts counting down when water passing through it. It will beep at the end of countdown. Counting down from: min 100 gal; max 9900 gal.
-
Elapse time: counting down, counting down from: min. setting 30 days, max setting 720 days.
-
Real time Flow rate: 0.22 to 2.1 GPM (gallons per minute) ** Minimum flow rate 0.22 GPM
Model: 8100T -G (gallon model) (internal part no. FM-81cable)
- Flow totalizing up to 2600 gallons or 9999 Liters
- Flow rate display from 0.22 gallons per minute to 2.1 GPM
- Connection: 1/4” NPT
- Electrical: 3 DC Volt (two AA battery) 1.0mA (display mode) 0.015mA (idle)
- Low battery power alert
- Automatic data saving when battery is out
- Reset button: press and hold the button for 5 sec. to reset to zero
Material:
- Sensor body: Acetal copolymer, TICONA M90
- Turbine: Acetal Copolymer
- Turbine shaft: #304 stainless steel
- O-ring: EPDM Rubber
- Housing: ABS resin
Specification:
- Dimension: (display) 2 3/4" x 2 1/4" x 1 3/8”
- Cable length from sensor to display: 56 inches
- Operating temperature: 40F to 172F or 4 C to 80 C
- Max operating pressure: 85 psi or 6 bar
- Accuracy: +/- 10%