Log In Log In  |  Checkout   |  14 item(s)
Specials Log InCreate Account Checkout  Shopping Cart14 item(s)

FM-8000T, DigiFlow Digital Water Flow Meter Rate Count Down [FM-8000T]


FM-8000T, DigiFlow Digital Water Flow Meter Rate Count Down

Digital Flow Monitor  (counting down, alert)   Made by Digiflow USA

  • Counting down: set a volume in gallons then it starts counting down when water passing through it.  It will beep at the end of countdown. Counting down from: min 100 gal;  max 9900 gal.

  • Elapse time: counting down, counting down from: min. setting 30 days,  max setting 720 days.

  • Real time Flow rate: range 0.4 to 3.7 GPM (gallons per minute)  

  • Minimum flor rate must be 0.4 GPM and up.

Model: 8000T -G  (gallon model)   (internal part no. FM-8000T)

  • Volume capacity monitor:  min. 100,  max. 9900 gallons (counting down)
  • Elapse time monitor:  min. 30 days,  max. 720 days
  • Flow rate display from 0.4 gallons per minute to 3.7 GPM
  • Connection:  3/8” NPT, + Bonus fitting:  two 1/4" fitting and two 3/8" fitting (fits 1/4" OD tubing and 3/8" OD tubing)
  • Electrical:  3 DC Volt (two AAA battery)   1.0mA (display mode) 0.05mA (idle)

Audible alert:  beeps near the end of countdown and beeps at the end of countdown

  • Low battery power alert
  • Display is auto-off after 10 seconds
  • Automatic data saving when battery is out
  • Reset button:  press and hold the button for 5 sec. to reset to zero


  • Sensor body: Acetal copolymer, TICONA M90
  • Turbine:  Acetal Copolymer
  • Turbine shaft: #304 stainless steel
  • O-ring:  EPDM Rubber
  • Housing:  ABS resin


  • Dimension: 2 7/8” x 2 3/4" x 2”
  • Operating temperature: 40F to 172F  or 4 C to 80 C
  • Max operating pressure: 85 psi or 6 bar
  • Accuracy: +/- 10%


 Customers who bought this product also purchased

Home  |   Specials  |   Log In  |   Create Account  |   Checkout  |   Shopping Cart